News & Events
Showroom HoursM-F: 9am to 5:00pm Sat: by appt. only, 9am to noon Schedule an appointment
:: New Weekend Hours ::
We will be open by appointment on Saturday’s from 9:00 am to noon. Please let us know in advance if you would like a Saturday visit.
For safety reasons, children under the age of 18 are not allowed in Slab Gallery. Thank you for your cooperation.
Contact5433 Goshen Springs Rd Norcross GA 30093 770-921-7601
Why does the texture and color vary from stone to stone?
Stone is a product of nature and subject to variations. Characteristics such as veining and mineral deposits will affect each piece. Stone will not only vary from quarry to quarry but from stone to stone. All Natural stone is unique… no two stones are alike. This is one of the most desirable characteristics of natural stone.
What do I use to clean my natural stone?
It’s best to use care products made specifically for stone. Your regular cleaning products may contain harmful chemicals that can react negatively to your stone. They may etch some stones or even make them look dull and lifeless.
What special care does stone require?
Apply a sealer if needed and clean your stone regularly. Don’t use acidic or abrasive cleaners.
How often do I need to seal my granite counter tops?
This depends on the sealer you choose. Some sealers need to be applied every 6 months to 1 year. Others last for 4-5 years. Ask your stone professional how your stone was sealed and how often it should be sealed again based on your use.
What is kitchen backsplash?
Backsplashes are vertical strips of stone, usually about 4 inches tall, that protect the walls from liquid spills. They can also be decorative and help to make the transition from the countertop to the wall.
Does natrual stone harbor bacteria?
If sealed and maintained properly, stone is extraordinarily resilient to bacteria.
How are stones priced?
This is one of the most frequently asked questions. And, the answer varies. Stone is usually quoted by the square foot and the cost depends on a number of things:
- Actual stone you choose to use.
- Special edges, full backsplashes, and other modifications add to the cost.
- Using an undermount sink rather than a drop in sink entails more polishing: therefore, this also adds to the cost.
Any stone project, like a beautiful piece of furniture, requires a certain amount of care to ensure the original beauty of your stone lasts for many years. We, at Marmi, have several programs to help you maintain the beauty and performance of your stone. In addition to our special services, the following list contains helpful tips to help extend the life of your stone product:
• We recommend you use trivets under all hot pots and pans. Placing hot items directly on the stone may cause discoloration on the surface.
• Stone is a porous material, so it is important to make sure you clean up any spills as soon as possible to prevent stains from occurring.
• Using a sealer is an important step in ensuring the beauty of your stone will last a lifetime. Sealers also help to make your surface more resistant to stains.
The edge detail of your countertop can make as much of a statement as the type of stone you choose. A simple edge creates a clean, contemporary profile while a classic ogee adds a touch of elegance to your finished project. There is a wide variety of edge profiles to select from, but if you do not find one you like, we encourage you to design your own. With Marmi’s excellent team, there are no limitations to the possibilites.
Acid wash: A treatment applied to the face of a stone to achieve a texture or finish that is distressed. Chemical treatments are more effective when applied to limestones and travertines than to granites and quartzites.
Backsplash: The area located between the countertop and lower cabinet usually decorated with tile or stone. Normally 16-18 inches in height.
Baluster: A short post or vertical member in a series that supports a railing or coping, thus forming a balustrade. May be curved or straight.
Balustrade: An entire railing system with top rail and balusters, and sometimes including a bottom rail.
Bevel: A sloped surface contiguous with a vertical or horizontal surface.
Bookmatching: Refers to the process of taking two consecutive slabs from a block of stone and “opening” them out to reflect a mirror image like the wings of a butterfly. This is done so that veining and coloration are continued throughout all the pieces that have been put together. (Bookmatching is sometimes referred to as butterflying.)
Bullnose: Convex rounding of a stone edge, such as an edge on a stair tread.
Bush hammering: A mechanical process which produces textured surfaces that vary from subtle to rough.
Brushed finish: Obtained by brushing the stone with a coarse rotary-type wire brush.
Caulking: Making a marble joint tight or leak-proof by sealing with an elastic adhesive compound.
Cladding: Non-loadbearing stone used as the facing material in wall construction that contains other material.
Fabrication: The final step before installation, fabrication is when our stone artists cut, polish, and finish your stone project.
Granite: A fine to coarse-grained igneous rock formed by volcanic action consisting or quartz, feldspar, and mica, with accessory minerals. Granite-type rocks included those of similar texture and origin.
Honed finish: Honed is a super fine smooth finish, but does not have the shine of a polished piece.
Lamination: A thick edge created by attaching an additional layer of stone to the existing edge with resin.
Limestone: A sedimentary rock composed of calcium carbonate; includes many varieties. Limestone that contain not more than 5% magnesium carbonate may be termed calcite limestone, as distinguished from those that contain between 5% and 40% as the mineral dolomite (dolostone, formerly known as the rock dolomite). Recrystallized limestone and compact, dense, relatively pure microcrystalline varieties that are capable of taking a polish are included in commercial marbles.
Nesting: The process of hand-selecting the area of the stone that you wish to use in your project. Nesting allows you to visualize exactly what the end result will be.
Marble: A metamorphic recrystallized limestone composed predominantly of crystalline grains of calcite or dolomite, or both, having interlocking or mosaic texture, marble that contains less than 5% magnesium carbonate may be termed calcite marble.
Miter: The junction of two units at an angle of which the junction lines usually bisect on a 450 angle.
Movement: The unique flow of the naturally occurring patterns that exist in natural stone.
Onyx: So called in trade, is a crystalline form, commonly micro crystalline, of calcium carbonate deposited usually from cold-water solutions. It is generally translucent and shows a characteristic layering, the term onyx marble is technically a misnomer, as true onyx is a variety of cryptocrystalline fibrous silica (chalcedony), and is closely related in form and origin to agate.
Polished finish: The finest and smoothest finish available in stone characterized by a high luster (gloss) and strong reflection of incident light, generally only possible on hard, dense materials.
Processing: The work involved in transforming building stone from quarry blocks to cut or finished stone. This includes primary sawing into slabs, it may also include both hand and mechanical techniques such as sawing, drilling, grinding, honing, polishing and carving.
Quarry: The location of an operation where a natural deposit of stone is removed from the ground.
Quartz: A silicon dioxide mineral that occurs in colorless and transparent or colored hexagonal crystals and also in crystalline masses. The stone is generally quarried in stratified layers, the surfaces of which are unusually smooth. Its crushing and tensile strengths are extremely high; the color range is wide.
Return: The right angle turn of a moulding.
Return head: Stone facing with the finish appearing on both the face and the edge of the same stone, as on the corner of a building.
Reveal: The depth of stone between its outer face and a window or door set in an opening.
Rodding: Reinforcement of a stone that is narrowly cut or is prone to cracking or breaking by cementing reinforcing rods into grooves or channels cut into the back of slab.
Shop drawing: A detailed fabrication and installation drawing showing dimensions and methods of anchorage.
Shop ticket: Also referred to as a “cutting” or “cut” ticket, it is generally produced by stone fabricator or shop for in-house use and reference. A shop ticket is produced for each differing piece of stone required for a project and is referenced to shop drawings, which are used for communicating intent with parties outside of the fabricating team or shop.
Slab: A lengthwise cut of a large quarry block of stone produced by sawing or splitting in the first milling or quarrying operation. A slab has tow parallel surfaces.
Soapstone: A massive variety of talc with a soapy or greasy feel used for hearths, washtubs, table tops, carved ornaments, chemical laboratory counter, etc., and known for its stain-proof qualities.
Templating: A measuring process that aids us in creating a pattern using the precise dimensions of your countertop. This pattern is then used during the fabrication process.
Travertine: A form of limestone precipitated from ground waters as in caves or in orifices of springs.
Tread: A flat stone used as the top-walking surface on steps.
Trim: Stone used as decorative items only, such as sill, coping, enframements, etc., with the facing of another material.
Vein: A layer, seam, or narrow irregular body of mineral material different from the surrounding formation.
Vein cut: Cutting quarried marble or stone perpendicular to the natural bedding plane.